Description
4L4022 LITE Liner Silikon SkinTex 3 L SOFT Locking
Mobility class: 1-3
for BK stumps
Connector: Locking (with distal connector)
Properties:
- made from medical grade* silicone gel
- seamless fabric cover
- length approx. 43 cm
- integrated outside matrix
- standard with approx. 10 cm matrix
- high comfort by using approx. 2,5 mm ComfortSil Silicone Gel
- perfect pressure distribution
- textile fabric for easy donning
- reduced pistoning by the matrix
- suitable for nearly all locking devices
| Article number gray | 4 cm distal circumference |
20 cm distal circumference |
40 cm distal circumference |
wight in kg |
| 4L4022-10-18-G | 18 - 20,5 cm | 23 - 30 cm | 27 - 38 cm | 0,49 |
| 4L4022-10-20-G | 20 - 21,5 cm | 24 - 32 cm | 28 - 40 cm | 0,52 |
| 4L4022-10-21-G | 21 - 22,5 cm | 26 - 32 cm | 30 - 42 cm | 0,54 |
| 4L4022-10-22-G | 22 - 24 cm | 27,5 - 34 cm | 31 - 43 cm | 0,57 |
| 4L4022-10-23,5-G | 23,5 - 25,5 cm | 29 - 35 cm | 32 - 44 cm | 0,60 |
| 4L4022-10-25-G | 25 - 27,5 cm | 3 - 36 cm | 34 - 45 cm | 0,63 |
| 4L4022-10-26,5-G | 26,5 - 29,5 cm | 31,5 - 38 cm | 36 - 46 cm | 0,69 |
| 4L4022-10-28-G | 28 - 31,5 cm | 33 - 40 cm | 38 - 48 cm | 0,73 |
| 4L4022-10-30-G | 30 - 33,5 cm | 35 - 42 cm | 40 - 52 cm | 0,78 |
| 4L4022-10-32-G | 32 - 35,5 cm | 37,5 - 44 cm | 42 - 56 cm | 0,83 |
| 4L4022-10-34-G | 34 - 37,5 cm | 40 - 46 cm | 44 - 60 cm | 0,88 |
| 4L4022-10-36-G | 36 - 39,5 cm | 42 - 48 cm | 46 - 62 cm | 0,91 |
| 4L4022-10-38-G | 38 - 41,5 cm | 44 - 52 cm | 48 - 64 cm | 0,97 |
| 4L4022-10-40-G | 40 - 44,5 cm | 46 - 54 cm | 50 - 66 cm | 1,00 |
| 4L4022-10-42-G | 42 - 50 cm | 47 - 55 cm | 53 - 68 cm | 1,10 |
How to choose the correct liner size
a) Measure the circumference of the residual limb at 4 cm from the distal end.
b) Choose the liner size corresponding to this measurement or the next smaller size, respectively.
c) Do not choose a liner whose size exceeds the measurement taken.
d) Never reduce by more than one liner size in order to avoid unnecessarily high compression.
Important:
In locking liners, a matrix with 10 cm length is integrated as a standard.This matrix should end below the head of the fibula and must not exceed it, as this could result in problems during knee flexion.
Sizing
How to choose the correct liner size
a) Measure the circumference of the residual limb at 4 cm from the distal end.
b) Choose the liner size corresponding to this measurement or the next smaller size, respectively.
c) Do not choose a liner whose size exceeds the measurement taken.
d) Never reduce by more than one liner size in order to avoid unnecessarily high compression.
Important:
In locking liners, a matrix with 10 cm length is integrated as a standard.This matrix should end below the head of the fibula and must not exceed it, as this could result in problems during knee flexion.